Wall-mounted bearing vibration monitor can predict mechanical failure by monitoring mechanical vibration. For example, through vibration analysis, it can judge whether the machinery is unbalanced, misaligned, friction, etc. And for some machinery, most of the shaft vibration is transmitted to the shaft vibration seat, in this case, measuring the vibration of the bearing housing, you can monitor the state of the machinery.
VB-Z430F wall-mounted bearing vibration monitor is used in combination with magnetoelectric vibration speed sensor, which can measure the vibration speed or vibration displacement of bearing seat, housing or structure. The monitor is especially suitable for the multi-point vibration measurement of motors, compressors, fans, etc.
· Input power protection function.
· You can set alarm parameters, range, relay delay and other parameters by pressing the button.
· The set parameters will not be lost after power loss.
· Sensor break detection, sensor break, block relay output, OK light out.
· Sensor signal buffered output.
· Lock the relay output within 10 seconds after power-on.
