VB-Z550B speed monitoring module has two channels, which can be set to the following functions:
1.Rotational speedV
2.Zero speed
3.Bond phase
· Monitor the signal of the 4-channel sensor. When the input is the eddy current sensor, supply -24V power to the preprocessor.
· Configure the alarm value, danger value, range and other parameters of the monitoring module through the configuration software.
· When the input sensor detects a fault, the bypass is automatically displayed to avoid misoperation of the relay.
· Each channel outputs a current signal proportional to the speed (4~20mA), with short-circuit protection.
· There are four LED light emitting diodes on the panel, respectively indicating the current working status of the module.
· The buffered sensor signal is output from the BNC plug on the front panel.
